_____________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid ?
Correct answer: A. Dew point
- A. Dew point
- B. Bubble point
- C. Dry bulb temperature
- D. Wet bulb temperature
Explanation
The dew point is reached when a gas-vapour mixture becomes saturated during cooling at constant pressure without liquid contact. Bubble point instead describes the first vapour bubble formed from a liquid mixture.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
_______________ centrifuge is the most suitable for separation of non-friable crystals?
Agglomeration of individual particles into clusters (flocs) is called flocculation. To prevent flocculation, the most commonly used dispersing agents are________________?
Separation of solid suspended in liquid into a supernatant clear liquid and a denser slurry employs a process termed as the___________________?
For absorbers, high pressure drop results in___________________?
The binary diffusivity in gases at atmospheric conditions is about ___________________?
Occurrence of 'case hardening' during drying of a high moisture solid cake _______________ the drying rate?