For absorbers, high pressure drop results in___________________?
Correct answer: C. High operating cost
- A. Increased efficiency
- B. Decreased efficiency
- C. High operating cost
- D. Better gas liquid contact
Explanation
A high absorber pressure drop requires greater gas-side pumping or compression work, increasing operating cost. Although pressure drop can accompany stronger contact, excessive pressure drop is generally an economic disadvantage and may indicate flooding.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
_____________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid ?
_______________ centrifuge is the most suitable for separation of non-friable crystals?
Agglomeration of individual particles into clusters (flocs) is called flocculation. To prevent flocculation, the most commonly used dispersing agents are________________?
The binary diffusivity in gases at atmospheric conditions is about ___________________?
Occurrence of 'case hardening' during drying of a high moisture solid cake _______________ the drying rate?
Refractory bricks are usually dried in a ________________ dryer?