All Free Electrical Engineering MCQs with Answers

Every Electrical Engineering question in the bank, across all chapters, each with the correct answer and a written explanation. Free and unlimited, with no account needed.

3,143 questions · page 44 of 158

  • A. Newton's law
  • B. Faraday's law of electromagnetic
  • C. Faraday's law of electrolysis
  • D. Gauss's law

Explanation: Faraday's first law of electrolysis states that the mass deposited or liberated at an electrode is directly proportional to the quantity…

Correct answer: Faraday's law of electrolysis
  • A. iron loss in core
  • B. skin effect
  • C. increase in temperature
  • D. capacitive effect between adjacent coil turns

Explanation: An iron-cored choke has core losses, such as hysteresis and eddy-current losses, which can be represented as an additional effective…

Correct answer: iron loss in core
  • A. reduce eddy current loss
  • B. increase heat radiation
  • C. make assembly cheap and easier
  • D. reduce circuit permeability

Explanation: Laminating an iron core breaks up the paths available for circulating eddy currents, greatly reducing eddy-current loss.

Correct answer: reduce eddy current loss
  • A. synchronous condenser
  • B. generator
  • C. induction motor
  • D. alternator

Explanation: An overexcited synchronous motor draws leading current and supplies reactive power; when operating without mechanical load, it performs…

Correct answer: synchronous condenser
  • A. rated r.p.m.
  • B. no load
  • C. 20 percent load
  • D. near full load

Explanation: An induction motor draws substantial magnetising current at light load, giving a poor power factor.

Correct answer: near full load
  • A. nuclear power plants
  • B. hydraulic turbines
  • C. diesel engines
  • D. steam accumulators
  • E. none of the above

Explanation: Diesel engines are widely used for ship propulsion because they provide high torque, good fuel economy, and practical operation at marine…

Correct answer: diesel engines
  • A. diesel engine
  • B. hydraulic turbine
  • C. steam turbine
  • D. gas turbine

Explanation: Hydraulic turbines, especially those used with large water heads, generally operate at lower speeds than steam, gas and diesel prime…

Correct answer: hydraulic turbine
  • A. To excite the poles of main exciter
  • B. To provide requisite starting torque to main exciter
  • C. To provide requisite starting torque to generator
  • D. None of the above

Explanation: A pilot exciter is a small auxiliary generator whose output supplies the field winding of the main exciter.

Correct answer: To excite the poles of main exciter
  • A. Induction motor
  • B. Under excited synchronous motor
  • C. Over excited synchronous motor
  • D. D.C. generator

Explanation: A synchronous condenser is a synchronous motor running without mechanical load and operated with overexcitation.

Correct answer: Over excited synchronous motor
  • A. water cooled
  • B. natural air cooled
  • C. forced air cooled
  • D. hydrogen cooled

Explanation: Large turbo-generators are generally hydrogen-cooled because hydrogen removes heat effectively while producing less windage loss than air.

Correct answer: hydrogen cooled
  • A. Supercharged engine
  • B. Diesel engine
  • C. Petrol engine
  • D. All of the above engines will equal power

Explanation: For equal cylinder size and speed, a petrol engine generally develops less power because its mean effective pressure is lower than that of…

Correct answer: Petrol engine
  • A. kW
  • B. kVAR
  • C. kWh
  • D. kVA

Explanation: A transformer is rated in kVA because its heating is determined by voltage and current, while its losses do not directly depend on the…

Correct answer: kVA
  • A. Electrical power developed in armature - copper losses
  • B. Mechanical power input - iron and friction losses
  • C. Electrical power developed in armature - iron and copper losses
  • D. Mechanical power input - iron and friction losses - copper losses

Explanation: Generator output is obtained from mechanical input after rotational losses such as friction and iron losses, followed by subtraction of…

Correct answer: Mechanical power input - iron and friction losses - copper losses
  • A. It will rotate at the same speed as that with its field winding closed
  • B. It will rotate at less speed as that with its field winding closed
  • C. It will rotate at dangerously high speed
  • D. None of these

Explanation: With the shunt field open, only weak residual magnetism remains, so the motor can accelerate to an excessively high and unsafe speed.

Correct answer: It will rotate at dangerously high speed
  • A. when under loaded
  • B. while over-excited
  • C. only at synchronous speed
  • D. below or above synchronous speed

Explanation: Synchronous torque is produced when the rotor is locked magnetically with the rotating stator field, which occurs at synchronous speed.

Correct answer: only at synchronous speed
  • A. the rotor excitation only
  • B. the supply voltage only
  • C. the rotor excitation and supply volt-age both
  • D. the rotor excitation, supply voltage and maximum value of coupling angle (90°)
  • E. none of the above

Explanation: For a cylindrical synchronous motor, maximum power is proportional to EV sin 90° divided by synchronous reactance, where E depends on…

Correct answer: the rotor excitation, supply voltage and maximum value of coupling angle (90°)
  • A. directly proportional to the square of the applied voltage
  • B. directly proportional to applied voltage
  • C. inversely proportional to applied voltage
  • D. none of the above

Explanation: The breakdown or pull-out torque corresponds to the maximum power angle and is proportional to EV/Xs.

Correct answer: directly proportional to applied voltage
  • A. static condenser
  • B. condenser
  • C. synchronous condenser
  • D. none of the above

Explanation: A synchronous motor running without mechanical load and over-excited draws leading current, supplying reactive power to the system.

Correct answer: synchronous condenser
  • A. the stator current will be zero
  • B. the stator current will be very small
  • C. the stator current will be very high
  • D. the back e.m.f. will be more than the supply voltage
  • E. none of the aboveElectromechanical Devices

Explanation: At no load with negligible losses, the motor needs no real power, so its ideal stator current is zero.

Correct answer: the stator current will be zero
  • A. rotor and stator teeth
  • B. rotor and the stator poles of opposite polarity
  • C. rotor and the stator poles of the same polarity
  • D. none of the above

Explanation: The load angle is the angular displacement between the rotor magnetic axis and the stator resultant field.

Correct answer: rotor and the stator poles of opposite polarity