Thickness of the frame of a plate and frame filter as compared to that of plates is___________________?
Correct answer: C. More
- A. Less
- B. Same
- C. More
- D. Either A. or B.
Explanation
The frame must provide the space into which the filter cake forms, so its thickness is greater than the thickness of a filter plate. This extra space is essential for filtration capacity.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
A high vapour velocity is required for high plate efficiency in a sieve plate column. The satisfactory value of operating vapor velocity for design purpose in sieve plate column is about _______________ percent of the flooding velocity?
The retention time of material in a rotary dryer depends upon its ______________________?
In a distillation column, the minimum residence time for liquid in the downspout is about ______________ seconds?
In packed towers provided with pall rings liquid redistributors are positioned at heights of every 6 metres or 5-10 times the column diameter, whichever is less. Maximum size of the pall rings should not exceed _______________________ of the column diameter?
The minimum plate spacing in most of the petroleum refinery distillation columns (of dia > 3 ft) is normally _____________ inches?
Smoker's equation for the calculation of number of equilibrium stages in a continuous binary distillation column is used, when the_________________?