In packed towers provided with pall rings liquid redistributors are positioned at heights of every 6 metres or 5-10 times the column diameter, whichever is less. Maximum size of the pall rings should not exceed _______________________ of the column diameter?
Correct answer: A. 1/10-1/15th
- A. 1/10-1/15th
- B. 1/5-1/10th
- C. 1/20-1/30th
- D. 1/2 to 1/4th
Explanation
To avoid excessive pressure drop and poor liquid distribution, random packing should be substantially smaller than the column diameter. For Pall rings, the usual limit is approximately one-tenth to one-fifteenth of the diameter.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
Thickness of the frame of a plate and frame filter as compared to that of plates is___________________?
A high vapour velocity is required for high plate efficiency in a sieve plate column. The satisfactory value of operating vapor velocity for design purpose in sieve plate column is about _______________ percent of the flooding velocity?
The retention time of material in a rotary dryer depends upon its ______________________?
The minimum plate spacing in most of the petroleum refinery distillation columns (of dia > 3 ft) is normally _____________ inches?
Smoker's equation for the calculation of number of equilibrium stages in a continuous binary distillation column is used, when the_________________?
In actual operation of a bubble cap distillation tower, the ______________ at the bottom of the tower is more than that at the top of the tower?