The turn-on time of an SCR with inductive load is 20 µs. The puls train frequency is 2.5 KHz with a mark/space ratio of 1/10, then SCR will___________?
Correct answer: A. Turn on
- A. Turn on
- B. Not turn on
- C. Turn on if inductance is removed
- D. Turn on if pulse frequency us increased to two times
Explanation
At 2.5 kHz, the pulse period is 400 μs; with a 1:10 mark/space ratio, the mark duration is about 36.4 μs. Since this exceeds the 20 μs turn-on time, the SCR will turn on.
Last updated
Practise Power Electronics
253 free Power Electronics MCQs from Electrical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Electrical Engineering questions like this
Electrical Engineering is on 2 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.
Related questions
60 thyrsistors are connected in series and parallel to form a 10 KV and 5.5 KA switch. Each thyristor is rated for 1.2 KV, 1 KA. The no. of parallel path are 6. The efficiency of the switch is______________________?
A capacitive load in voltage source inverters generates ________________?
A carrier based PWM technique in CSI is composed of____________?
A combination of synchronized leading edge and trailing edge modulation has also been used to control a____________?
A commutating rectifier consists of commutator driven by___________?