The most common packing used in industrial operations is _______________ rings?
Correct answer: A. Raschig
- A. Raschig
- B. Lessing
- C. Cross-partition
- D. Single spiral
Explanation
Raschig rings are the traditional and most widely used random packing in industrial gas absorption and stripping equipment. The other packings are specialized alternatives with less general use.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
Refractory bricks are usually dried in a ________________ dryer?
Occurrence of 'case hardening' during drying of a high moisture solid cake _______________ the drying rate?
The binary diffusivity in gases at atmospheric conditions is about ___________________?
Capacity of a rotary dryer depends on its __________________?
Berl saddle made of carbon cannot be used for ___________________?
For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of _______________ microns (1 mm = 1000 microns)?