The electric current obtained from galvanic cell is a result of electrons being pushed forced from the negative electrode, through an external wire, to positive electrode. The force with which these electrons move through the wire is called:
Correct answer: D. Both A and C
- A. Electromotive force (Emf)
- B. Electrode potential
- C. Cell potential
- D. Both A and C
Explanation
The correct answer is 'Both A and C' because 'Electromotive force' (Emf) and 'Cell potential' are related concepts. Emf is the maximum potential energy per unit charge provided by the cell to drive the current, while cell potential refers to the specific potential difference between the electrodes that drives the flow of electrons from the anode to the cathode in a galvanic cell. 'Electrode potential' is incorrect as it pertains to the potential of an individual electrode, not the driving force for the entire cell.
Last updated
About Electrochemistry
Electrochemistry describes electron transfer through oxidation and reduction, identifies oxidizing and reducing agents, and applies oxidation numbers to balance redox equations. It also covers electrode potential and the standard hydrogen electrode, which provides the reference for comparing the reduction tendencies of other electrodes.
Practise Electrochemistry
696 free Electrochemistry MCQs from Chemistry, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemistry questions like this
Chemistry is on 12 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.
Related questions
10-2 mole of Fe3O4 is treated with excess KI solution in presence of dilute H2SO4, the products are Fe2+ and I2(g). What volume of 0.1 (M) Na2S2O3 will be needed to reduce the liberated I2(g)?
+3 and +5 oxidation states are often shown by:
3 faraday of electricity is passed through molten Al2O3 , aqueous solution of CuSO4 and molten NaCl taken in three different electrolytic cells. The amount of Al, Cu and Na deposited at the cathodes will be in the ratio of:
5.3 gm of M2CO3 is dissolved in 150 ml of 1N HCl. The unused acid required 100 ml of 0.5N NaOH. Hence equivalent weight of M is:
8H++ MnO4- → Mn2+ + 4H2O , which one is correct about given equation?