Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will______________________?
Correct answer: D. Increase
- A. Data insufficient to predict pressure drop
- B. Decrease
- C. Remain same
- D. Increase
Explanation
Both flows are laminar, so pressure drop at fixed velocity is proportional to viscosity. The new liquid has a viscosity five times that of water, causing the pressure drop to increase.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Fluid Flow Operations
909 free Fluid Flow Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Fluid Flow Operations questions
The ratio of the depth of flow to the hydraulic radius for the most economical trapezoidal section, in open channel flow is_____________________?
Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined) ?
______________ pumps are axial flow pumps?
Which of the following denotes the effect of compressibility in fluid flow ?
A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is________________?
Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum ?