Overall distillation column efficiency for most of the refinery columns can be given by (for μ = 0.07 - 1.4 cp and relative volatility < 4) (where ε = overall column efficiency, % μ = molal average viscosity of feed at average column temperature and pressure, cp Δp = pressure drop per tray, psi) ?
Correct answer: A. η = 17 - 61.1 log μ
- A. η = 17 - 61.1 log μ
- B. η = 24.6 (Δp/μ)
- C. η = 1.66 - 0.25 log μ
- D. η = 0.25 log μ - 1.67
Explanation
For the stated viscosity and relative-volatility range, the refinery-column correlation is η = 17 − 61.1 log μ, with η expressed as a percentage. The other expressions either have the wrong form or give unrealistic efficiencies.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
In actual operation of a bubble cap distillation tower, the ______________ at the bottom of the tower is more than that at the top of the tower?
Smoker's equation for the calculation of number of equilibrium stages in a continuous binary distillation column is used, when the_________________?
The minimum plate spacing in most of the petroleum refinery distillation columns (of dia > 3 ft) is normally _____________ inches?
The operating velocity in the absorption tower is usually 40-50% of the flooding velocity. Packed absorption towers are normally designed for a pressure drop of about _________________ mm of water column per metre height of packing?
Pressure drop (Δp) and the superficial gas mass velocity (G) in case of packed absorption tower operating in the preloading range are related as_________________?
Holes of a sieve tray are arranged in triangular pitch of _________________ times the hole diameter?