How many NAND gates are used to form an AND gate?
Correct answer: B. 2
- A. 1
- B. 2
- C. 3
- D. 4
Explanation
Two NAND gates are used: the first produces the negated AND, and the second inverts it to form an AND gate.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
About Electronics
A p-n junction forms when p-type and n-type semiconductor regions meet, creating a depletion layer, barrier potential and rectifying action. The work covers forward and reverse bias, junction current, diode characteristics, and how a diode converts alternating current into pulsating direct current through half-wave and full-wave rectification.
Practise Electronics
660 free Electronics MCQs from Physics, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Physics questions like this
Physics is on 16 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.
More Electronics questions
In a silicon transistor, a change of 8.86 mA in the emitter current produces a change of 6.254 mA in the collector current. What change in the base current is necessary to produce an equivalent change in the collector current?
For a transistor, the current amplification factor α = 0.9. This transistor is connected in a common emitter configuration. When the base current changes by 0.4 mA, the change in collector current will be:
A common emitter amplifier is designed with an NPN transistor (α = 0.99). The input impedance is 1 kΩ and load is 10 kΩ. The voltage gain will be:
Thermionic emission from a heated filament varies with its temperature T as:
Which of the following is not correct regarding Zener diodes?
A diode characteristic curve is a graph between: