Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by__________________?
Correct answer: B. Conduction
- A. Eddies current
- B. Conduction
- C. Convection
- D. None of these
Explanation
The laminar sub-layer is a very thin region near the pipe wall where turbulent mixing is strongly suppressed. Heat crosses this layer mainly by molecular conduction rather than by eddy motion.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Heat Transfer Operations
645 free Heat Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Heat Transfer Operations questions
For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd, then__________________?
Which of the following forced convection heat transfer equation accounts for the liquid viscosity effect for viscous liquids ?
Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for_________________?
_____________ heat exchanger is the most suitable, when the temperature of shell side fluid is much higher than that of tube side?
Evaporation of 1kg of water from a solution in a single effect evaporator requires about ________________ kg of steam?
Thermal conductivities of most of the liquids _______________ with rise in temperature?