Dynamic equalizing circuit is used for________________?
Correct answer: A. equal division of voltage across each thyristor
- A. equal division of voltage across each thyristor
- B. equal division of current through each thyristor in parallel
- C. equal division of voltage across each thyristor in parallel
- D. equal division of current through each thyristor in series
Explanation
A dynamic equalizing circuit, typically an RC snubber, is connected across series thyristors to equalize transient voltage sharing during switching. Current sharing in parallel devices requires a different equalizing arrangement.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Power Electronics
253 free Power Electronics MCQs from Electrical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Electrical Engineering questions like this
Electrical Engineering is on 2 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.
More Power Electronics questions
A rectifier with an external low pass filter is an example of______________?
An ideal switch is___________?
IGBT stands for___________?
A string of n parallel SCRs is operated at 72 KA, the rating of each SCR is 1 KA. If derating factor of the string is 0.1. value of n will be___________?
60 thyrsistors are connected in series and parallel to form a 10 KV and 5.5 KA switch. Each thyristor is rated for 1.2 KV, 1 KA. The no. of parallel path are 6. The efficiency of the switch is______________________?
A thyristor string is made of a no. of SCR connected in series and parallel. The string have volume and current of 11 KV and 4 KA. The voltage and current rating of available SCRs are 1800 V and 1000 A. For a string efficiency of 90 % let the number of SCRs in series and parallel are a and b respectively. Then the value of a and b will be_____________?