Why the spring is made of steel in comparison of copper
Correct answer: C. Steel is more elastic than copper
- A. Copper is more costly than steel
- B. Copper is more elastic than steel
- C. Steel is more elastic than copper
- D. None of the above
Explanation
The primary reason for using steel over copper in making springs is steel's superior elasticity. Elasticity is a material's ability to deform under stress and return to its original shape when the stress is removed. Steel, due to its higher elastic limit, is better suited for applications like springs, where repeated deformation and recovery are necessary. Copper, while a good conductor and relatively ductile, does not match steel's elasticity, making it less appropriate for this application. While cost may be a consideration, it is not the determining factor in this context. Hence, option C is correct, and options A, B, and D are incorrect for the reasons stated.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
About Physics of Solids
Solids are compared through crystal structure, amorphous arrangement, elasticity, plastic deformation, stress, strain and Young’s modulus. Electrical behavior depends on available charge carriers and band structure, so conductors, insulators and semiconductors must be distinguished from mechanical properties such as strength, stiffness and brittleness.
Practise Physics of Solids
320 free Physics of Solids MCQs from Physics, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Physics questions like this
Physics is on 11 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.
More Physics of Solids questions
If the length of a wire is reduced to half, then it can hold the
In a wire of length L, the increase in its length is l. If the length is reduced to half, the increase in its length will be
A wire is loaded by 6 kg at its one end, the increase in length is 12mm. If the radius of the wire is doubled and all other magnitudes are unchanged, then increase in length will be
The ratio of diameters of two wires of the same material is n:1. The length of each wire is 4 m. On applying the same load, the increase in length of thin wire will be
Two identical wires of rubber and iron are stretched by the same weight, then the number of atoms in the iron wire will be
The force constant of a wire does not depend on