Which one shows the diagrammatic heat balance in a furnace ?
Correct answer: A. Sankey diagram
- A. Sankey diagram
- B. Cox chart
- C. Ostwald chart
- D. None of these
Explanation
A Sankey diagram represents an energy or heat balance by showing input energy and its useful and wasted outputs in proportionate widths. Cox and Ostwald charts are mainly used for other combustion or flue-gas analyses.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Heat Transfer Operations
645 free Heat Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Heat Transfer Operations questions
If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an ______________ furnace?
Large tonnage of refractory bricks are dried in a_____________________?
Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan_________________?
In reverberatory furnace, charge is heated mainly by__________________?
Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above _____________ °C, because corrosion prevails at higher temperatures?
In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of__________________?