Which of the following factors affect the pressure drop in a co-current gas-liquid absorption packed tower ?
Correct answer: D. All A., B. and C.
- A. Size, shape, orientation and surface of the packing particles
- B. Density and viscosity of fluids
- C. Fluid flow rates
- D. All A., B. and C.
Explanation
Packed-tower pressure drop depends on packing geometry and surface, fluid density and viscosity, and gas-liquid flow rates. Therefore, all three groups of factors affect the pressure drop.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
Which of the following packing materials provides for maximum mass transfer ?
In sieve plate column, holes are drilled or punched in sizes ranging from 2.5 to 12 mm (5 mm being widely used). The hole pitch is normally ______________ times the hole diameter to give the required hole area?
"A claming section" before the liquid flows into the downcomer is provided to__________________?
The slope of the feed line in distillation operation is given by (where, q = fraction of the feed stream that is liquid ?
Liquid gradient over the tray results due to the___________________?
Height equivalent to a theoretical plate (HETP) is the height of packing that will give the same separation as one theoretical plate in gas-liquid mass transfer operations like distillation, absorption/stripping and humidification/dehumidification. HETP which is experimentally determined, depends upon the_______________?