The use of space time is preferred over the mean residence time in the design of a/an____________________?
Correct answer: B. Ideal tubular-flow reactor
- A. Batch reactor
- B. Ideal tubular-flow reactor
- C. Slurry reactor
- D. CSTR
Explanation
Space time is based on reactor volume and inlet volumetric flow, making it convenient for sizing an ideal tubular-flow reactor. Mean residence time is more directly associated with the actual age distribution of material in the reactor.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Chemical Reaction Engineering
395 free Chemical Reaction Engineering MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Chemical Reaction Engineering questions
A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by__________________?
Time required for 50% decomposition of a liquid in an isothermal batch reactor following first order kinetics is 2 minutes. The time required for 75% decomposition will be about _______________ minutes?
The concentration of A in a first order reaction, A → B, decreases_____________________?
For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of ?
Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually ________________ the concentration of catalyst, if it does not entail a chain mechanism?
Fractional conversion _________________ for an exothermic reversible chemical reaction, when the temperature is maximum?