The slope of 9-line is determined by the______________________?
Correct answer: C. Thermal condition of the feed
- A. Reflux ratio
- B. Plate efficiency to be achieved
- C. Thermal condition of the feed
- D. Relative volatility
Explanation
The q-line represents the feed condition, and its slope is q/(q−1). Thus, the slope is fixed by the feed's thermal condition, such as whether it is liquid, vapour, or partly vaporized.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
The dew point of an unsaturated gas-vapor mixture does not depend upon the ____________________ of the mixture?
The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid) ?
The critical moisture content in case of drying indicates the _______________ rate period?
Freundlich equation applies to the adsorption of solute from_____________________?
A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))_____________?
The Hatta number is important in______________________?