The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2. The flux, when the element temperature is increased to 1000°C for the same furnace temperature is_____________________?
Correct answer: A. 16.5 kW/m2
- A. 16.5 kW/m2
- B. 12.0 kW/m2
- C. 14.6 kW/m2
- D. 11.2 kW/m2
Explanation
For the same furnace temperature, net radiation varies as T_element⁴ − T_furnace⁴, with temperatures in kelvin. Using 1073 K, 1273 K and 573 K gives a flux of approximately 16.5 kW/m².
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Heat Transfer Operations
645 free Heat Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Heat Transfer Operations questions
Kirchoff's law is applicable to________________?
The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2.K. At steady state, the temperature of the right face in °C is____________________?
When vaporisation takes place through a blanketting film of gas, the phenomenon is termed as ___________________ boiling?
A composite flat wall of a furnace is made of two materials 'A' and 'B'. The thermal conductivity of 'A' is twice of that of material 'B', while the thickness of layer of 'A' is half that of B. If the temperature at the two sides of the wall are 400 and 1200°K, then the temperature drop (in °K) across the layer of material 'A' is________________?
In forced convection, the heat transfer depends on _______________?
In SI units, fouling factor is expressed in __________________?