The most commonly used feed stock for the reforming reactor is ___________________?
Correct answer: C. Straight run gasoline
- A. Heavy fuel oil
- B. Residuum
- C. Straight run gasoline
- D. Casing head gasoline
Explanation
Catalytic reforming commonly receives straight-run gasoline, especially the naphtha fraction, to convert low-octane hydrocarbons into higher-octane reformate. Heavy fuel oil and residuum are too heavy for the usual reforming feed.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Chemical Process Principles
2,710 free Chemical Process Principles MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Chemical Process Principles questions
Smoke point of a test sample of kerosene is found to be 15 mm. On removal of ________________ from it, the smoke point rises to 25 mm?
Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become _______________________ mm?
Aniline point is the _________________?
Crude oils containing more than ____________ kg of total salts (expressed in terms of NaCl) per thousand barrel is called a 'salty crude' ?
Octane number of gasoline is a measure of its__________________?
Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about ______________ kg/cm2?