The material of the heating element for a furnace should have___________?
Correct answer: C. high specific resistance
- A. lower melting point
- B. higher temperature coefficient
- C. high specific resistance
- D. all of the above
Explanation
A furnace element should have high specific resistance so it produces substantial heat with a practical length and current. It should also have a high melting point, so “lower melting point” and “all of the above” are unsuitable.
Last updated
Practise Power Electronics
253 free Power Electronics MCQs from Electrical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Electrical Engineering questions like this
Electrical Engineering is on 2 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.
Related questions
60 thyrsistors are connected in series and parallel to form a 10 KV and 5.5 KA switch. Each thyristor is rated for 1.2 KV, 1 KA. The no. of parallel path are 6. The efficiency of the switch is______________________?
A capacitive load in voltage source inverters generates ________________?
A carrier based PWM technique in CSI is composed of____________?
A combination of synchronized leading edge and trailing edge modulation has also been used to control a____________?
A commutating rectifier consists of commutator driven by___________?