The LMTD correction factor (FT) is defined as the __________________?
Correct answer: A. Ratio of true temperature difference to the LMTD
- A. Ratio of true temperature difference to the LMTD
- B. Ratio of LMTD to the true temperature difference
- C. Differenced of true temperature difference and the LMTD
- D. Geometric mean of the true temperature difference and the LMTD
Explanation
For multipass or cross-flow exchangers, the actual mean temperature driving force is lower than the ideal countercurrent LMTD. Thus, the correction factor is defined as true mean temperature difference divided by the countercurrent LMTD.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Heat Transfer Operations
645 free Heat Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Heat Transfer Operations questions
Which of the following is the best tube material from thermal conductivity point of view alone ?
In a shell and tube heat exchanger, the shortest centre to centre distance between the adjacent tubes is__________________?
At equal mass velocities, the values of film co-efficients for gases as compared to that for liquids are generally ?
High pressure fluid in a shell and tube heat exchanger should preferably be routed through the________________?
Pick out the wrong statement pertaining to the design of a horizontal tube evaporator ?
Most commonly used crude heater before the fractionation tower in a refinery is the ______________ heater?