The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2, V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3)_________________?
Correct answer: A. 3.6 AVS.ρ
- A. 3.6 AVS.ρ
- B. 3.6 A.V.ρ
- C. 3.6 A.S. ρ
- D. 3.6 AVS/ρ
- E. Answer: Option
Explanation
The solid volumetric flow is AVS, and multiplying it by solid density gives kg/s; the factor 3.6 converts this to tonnes per hour. Therefore the capacity is 3.6AVSρ.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Fluid Flow Operations
909 free Fluid Flow Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Fluid Flow Operations questions
For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np) varies with NRe as_________________?
Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a ______________ conveyor?
Which of the following is the most suitable for handling fibrous and dense slurries ?
Out of the following size reduction equipments, the maximum feed size can be accepted by the__________________?
Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of__________________?
Solid particles separation based on the difference in their flow velocities through fluids is termed as the__________________?