The approximate liquid depth in an agitation tank is equal to (where, d = tank diameter)_________________?
Correct answer: C. d
- A. 0.5 d
- B. 0.75 d
- C. d
- D. 2 d
Explanation
Agitation tanks are commonly proportioned with liquid depth approximately equal to the tank diameter, giving H ≈ d. A depth of 0.5d is usually too shallow for standard tank geometry.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
In a rotary drier, the average retention time of solid is (where Z = length of the drier, metres ρ = apparent solid density, kg/m3 L = flow rate of dry solids, kg/see. m2 drier crosssection H = hold up of solid.) ?
Optimum reflux ratio in a continuous distillation column is determined by the__________________?
Bubble cap diameter used for the distillation column having diameter ranging from 1.5 to 4.5 metres is about ______________ mm?
____________ is the determining factor for the number of bubble caps to be used per tray?
Normally, the length to diameter ratio of rotary dryers varies from 4 to 10 and for its economic operation; the number of transfer units (NTU) for such dryers varies from ?
In case of saddle packing (e.g., berl and intralox saddles), the maximum size of the packing should not exceed ______________ of the column diameter?