Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively) ?
Correct answer: A. C/E
- A. C/E
- B. E/C
- C. CE
- D. 1/CE
Explanation
Economy equals evaporation rate divided by steam consumption, so rearranging gives steam consumption = capacity/economy. Thus the required expression is C/E.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Heat Transfer Operations
645 free Heat Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Heat Transfer Operations questions
Which of the following is unimportant in forced convection ?
Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the _____________ zone?
The number of kg vaporised per kg of steam fed to the evaporator is defined as____________?
Dittus-Boelter equation cannot be used for molten metals mainly due to its very low_____________________?
The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2. The temperature of the inside wall is - 5°C. The outside wall temperature is___________________?
In a multipass shell and tube heat exchanger, tube side return pressure loss is equal to _____________ the velocity head?