____________ process is meant for direct hydrogenation of coal to produce liquid fuel?
Correct answer: C. Bergius
- A. Fischer-Tropsch
- B. Lurgi
- C. Bergius
- D. None of these
Explanation
The Bergius process directly hydrogenates pulverised coal under high temperature and pressure to form liquid hydrocarbons. Fischer-Tropsch instead converts coal-derived synthesis gas into liquid fuel indirectly.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Chemical Process Principles
2,710 free Chemical Process Principles MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Chemical Process Principles questions
During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the____________________?
If oxygen content in the flue gas rises too high, fuel is being wasted by _______________?
Higher efficiency in the combustion of solid fuel cannot be achieved by________________?
One kg of carbon for theoretically complete combustion requires ______________ kg of air?
When incomplete combustion loss is high, the flue gas analysis shows large amount of ________________?
Naphthalene recovered from coke oven gas is used___________________?