Percentage of nitrogen in blast furnace gas may be around__________________?
Correct answer: C. 55
- A. 5
- B. 25
- C. 55
- D. 80
Explanation
Blast-furnace gas contains a large amount of nitrogen brought in with the air blast, commonly around 50 to 60% by volume. Thus approximately 55% is the suitable value.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Chemical Process Principles
2,710 free Chemical Process Principles MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Chemical Process Principles questions
In low temperature carbonisation of coal as compared to high temperature carbonisation _____________ produced is less?
A fuel with high heat release rate will_________________?
A certain thickness of the coal, if stored unscientifically on soft (katcha) ground having no metallic/concrete flooring gets sunked into the ground, which is termed as the 'carpet loss'. The carpet loss may be of the order of ______________ cms?
During coking of coal, the ash content (percentage)________________?
Ash content in the coke produced from a coking coal having 20% ash may be around _____________ percent?
The calorific value is the highest out of the following for__________________?