Percentage of carbon monoxide in blast furnace gas may be around ____________________ ?
Correct answer: C. 22
- A. 8
- B. 14
- C. 22
- D. 52
Explanation
Blast-furnace gas typically contains roughly 20 to 25% carbon monoxide, along with nitrogen, carbon dioxide and a small amount of hydrogen. Therefore about 22% is a representative value.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Chemical Process Principles
2,710 free Chemical Process Principles MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Chemical Process Principles questions
Main use of hard coke produced by high temperature carbonisation is in the ____________________ ?
A coal gasifier operating at 20 atm. (e.g. Lurgi gasifier) as compared to one operating at atmospheric pressure (e.g. Kopper-Totzek or Winkler gasifier) will produce a gas having _____________________?
Which of the following fuels is the best for burning on chain grate stoker ?
Which is the most matured coal ?
Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its ___________________?
Incomplete combustion of a fuel is characterised by the high _______________ in the flue gas?