Most of the storage vessels/tanks are made cylindrical, because of the fact that a cylinder _________________?
Correct answer: A. Both A. and B.
- A. Both A. and B.
- B. Is easy to fabricate
- C. Has greater structural strength
- D. Neither A. nor B.
Explanation
Cylindrical tanks distribute pressure and structural loads efficiently, giving greater strength than rectangular vessels, and their curved shells are also relatively easy to fabricate. Thus both listed advantages apply.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Plant Design and Economics
803 free Plant Design and Economics MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Plant Design and Economics questions
Apex angle of conical heads used in the bottom heads of chemical process equipments is usually__________________?
_____________ dished head is the strongest of all?
In case of a continuous distillation column, increase in reflux ratio may result in the______________?
The testing pressure of storage tanks and pressure vessels designed as per Indian standard codes should be about ______________ times the design pressure?
Circumferential (hoop) stress in a thin cylindrical vessel under internal pressure is _____________ the longitudinal stress?
A cylindrical pressure vessel of volume 6 πm3 has to be designed to withstand a maximum internal pressure of 10 atm. The allowable design stress of the material is 125N/mm2 and corrosion allowance is 2 mm. The thickness of the vessel for a length/diameter ratio of 3 will be close to________________?