LMTD can't be used as such without a correction factor for the_________________?
Correct answer: D. All A. B. and C.
- A. Multipass heat exchanger
- B. Baffled heat exchanger
- C. Condensation of mixed vapour in a condenser
- D. All A. B. and C.
Explanation
The basic LMTD must be multiplied by a correction factor when the exchanger arrangement causes temperature crossflow or multiple passes, as in common baffled shell-and-tube designs. The stated options treat all three listed arrangements as requiring this correction.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Heat Transfer Operations
645 free Heat Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Heat Transfer Operations questions
Conductance is given by (where, x = thickness, A = heat flow area, K = thermal conductivity.)?
In a shell and tube heat exchanger, putting a longitudinal baffle across the shell, forces the shell side fluid to pass _____________ through the heat exchanger ?
With increase in temperature, the thermal conductivity of most liquids_________________?
For what value of Prandtl number, St = f/2 ?
In a heat exchanger, the rate of heat transfer from the hot fluid to the cold fluid___________________?
Grashoff number is given by________________?