Liquid gradient over a tray can be minimised by________________?
Correct answer: F. All A., B. and C.
- A. Providing a higher skirt clearance or a higher weir
- B. Decreasing the number of rows of caps through which the liquid flows or by decreasing the
- C. velocity of liquid flow past the caps or by reducing the distance along the tray through which
- D. the liquid must flow
- E. Using split flow, radial flow or cascade flow for column diameter large than 4 ft
- F. All A., B. and C.
Explanation
Liquid gradient is reduced by lowering liquid resistance and travel distance, for example by reducing cap rows, liquid velocity, or flow length. Split, radial, and cascade arrangements also help in large-diameter columns, so the combined choice is appropriate.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
Which of the following efficiencies can be greater than 100% ?
What is the slope of the operating line in the rectifying section of a distillation column ?
Weep holes provided in the plates of a distillation column ____________________?
Slope of counter-current flow rotary drier is in the range of ____________ meter/metre?
Maximum plate efficiency is achieved in case of ______________ flow?
Diameter of the sieve tray column is determined by the_________________?