Kg of liquid evaporated per hour in an evaporator is defined as its_________________?
Correct answer: A. Capacity
- A. Capacity
- B. Economy
- C. Steam load
- D. None of these
Explanation
Evaporator capacity is the mass of liquid evaporated per unit time, commonly reported in kg/h. Economy instead measures kilograms of water evaporated per kilogram of steam consumed.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
Agitated film evaporator is suitable for concentrating _____________ liquids?
During crystallisation, formation of crystal can occur in ______________ solution only?
In a multiple effect evaporator, the effect of boiling point elevation is to______________________?
In a laboratory test run, the rate of drying was found to be 0.5 x 10^-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is______________________?
The dimensionless group in mass transfer that is equivalent to Prandtl number in heat transfer is_________________?
The driving potential for the crystal growth during crystallisation is the _______________ of the solution?