Inside the distillation columns, the ________________________?
Correct answer: B. Driving force for the liquid flow is its weight
- A. Highest temperatures is near the feed plate
- B. Driving force for the liquid flow is its weight
- C. Vapors are not always at their dew points
- D. All A., B. and C.
Explanation
Liquid flows down a distillation column mainly because of gravity, so its driving force is its weight. The highest temperature is normally near the reboiler, not the feed plate, and actual vapour may not be exactly at its dew point.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
An Azeotropic mixture is a ________________ mixture?
The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its_____________________?
The diffusivity D. in a binary gas mixture is related to the temperature (T) as________________________?
Total reflux in a distillation operation requires minimum____________________?
Boiling point diagram is not affected by the ambient______________________?
A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around _______________ °C?