In the allocated cap area, bubble caps are generally arranged on equilateral triangular pitch. Number of caps fixed on a plate is with a __________________?
Correct answer: C. Either A. or B.
- A. Clearance of 25-75 mm
- B. Cap pitch of 1.3-2 times the cap diameter
- C. Either A. or B.
- D. Neither A. nor B.
Explanation
Bubble-cap layouts commonly use a clearance of roughly 25 to 75 mm and a pitch around 1.3 to 2 times the cap diameter. Both A and B describe accepted spacing guidance.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
In distillation columns, bubble caps are held in place over trays by ________________?
Cylindrical shell thickness of rotary drier is generally _______________ mm?
The length of straight rectangular weir used on cross-flow trays is generally ________________ the column diameter ?
For identical operating conditions, the pressure drop over _______________ tray is the highest out of the following?
Steam economy is defined as the amount of evaporation per unit amount of steam used, while the capacity is the total evaporation obtained per hour. Use of multiple effects in evaporation ?
Bubble cap tray is the most commonly used tray in large distillation column, because______________?