For contacting a highly soluble gas with a liquid ____________________?
Correct answer: A. Bubble the gas through liquid
- A. Bubble the gas through liquid
- B. Spray the liquid on gas stream
- C. Either A. or B. would suffice
- D. None of these
Explanation
A highly soluble gas is efficiently contacted by dispersing it as bubbles through the liquid, giving repeated gas-liquid contact and rapid absorption. Spraying liquid into the gas is more commonly preferred for gases with lower solubility.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
In saturated gas, the__________________?
In a counter-current extractor, as the axial mixing increases, the extraction efficiency______________________?
At equilibrium the concentration of water in vapour phase (C*) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is_________________?
The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are __________________?
Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in ____________________?
The binary diffusivity in gases does not depend upon the ___________________?