Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is_______________?
Correct answer: D. All A, B. & C.
- A. Added to the feed slurry
- B. Pre-coated on the filter medium prior to filtration
- C. Separated from the cake by dissolving solids or by burning it off
- D. All A, B. & C.
Explanation
Filter aids may be mixed with the slurry or precoated on the filter medium to form a more porous cake with lower resistance. When necessary, the aid can be removed by dissolving or burning it, so all three statements apply.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Chemical Process Principles
2,710 free Chemical Process Principles MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Chemical Process Principles questions
Ultracentrifuges running at speeds upto 100000 rpm is normally used for the_____________________?
Maximum size reduction in a fluid energy mill is achieved by___________________?
Which of the following is not a wet classifier ?
Trommels are revolving screens which normally operate in the range of _______________ rpm?
The specific surface of spherical particles is given by (where D and ρ are diameter and density of particle) ?
For sizing of fine materials, the most suitable equipment is a____________________?