_______________ columns are used for liquid dispersion in a continuous gas phase ?
Correct answer: D. Packed
- A. Sieve plate
- B. Pulse
- C. Bubble cap
- D. Packed
Explanation
In a packed column, gas forms the continuous phase while liquid spreads over the packing as a dispersed film. This arrangement provides the interfacial area needed for gas-liquid mass transfer.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? [email protected]
Practise Mass Transfer Operations
669 free Mass Transfer Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Discussion
Stuck on an option, or know a faster way to get there? Ask or explain it here.
No comments yet. Be the first to explain this one.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Mass Transfer Operations questions
An alkaline solution is used to reduce the concentration of carbon dioxide in a stream from 10% to 0.1% by absorption with irreversible chemical reaction. The overall number of transfer units based on gas phase is ?
Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a____________________?
With increase in the concentration of the adsorbate, the integral heat of adsorption____________________?
The efficiency of a plate column will be maximum, when the flow is ideal __________________ the plate?
Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their____________________?
Priming in a distillation column_________________?