Air vessel of a reciprocating pump is initially filled with___________________?
Correct answer: B. Compressed air
- A. Atmospheric air
- B. Compressed air
- C. Water
- D. None of these
Explanation
An air vessel contains a trapped air cushion that is compressed during operation and smooths the fluctuating discharge of a reciprocating pump. It is therefore initially charged with compressed air rather than water.
Report an error
The more specific you are, the faster it gets fixed. A source beats an opinion.
Prefer email? support@testustad.com
Practise Fluid Flow Operations
909 free Fluid Flow Operations MCQs from Chemical Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.
Exams that ask Chemical Engineering questions like this
Chemical Engineering is on this paper prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for it.
More Fluid Flow Operations questions
A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit E. to deliver water at a flow rate of 0.001 m3/s? The Fanning friction factor, f is 0.0062 ?
Fanning friction factor equation applies to the _____________ fluid flow?
A pressure of 10 m head of water is equivalent to ______________ kN/m2?
Fluid flow through a packed bed is represented by the ______________ equation?
The location of centre of pressure, which defines the point of application of the total pressure force on the surface, can be calculated by applying the principle of moments according to which "sum of the moment of the resultant force about an axis is equal to the sum of the components about the same axis". The centre of pressure of a rectangular surface (of width 'w') immersed vertically in a static mass of fluid is at a depth of (where, y = depth of the liquid) ?
In continuous fluidisation_________________?