According to Abram's law, the compressive strength of workable concrete generally increases when the water-cement ratio is

Correct answer: A. Decreased, provided compaction is adequate

  • A. Decreased, provided compaction is adequate
  • B. Increased within the same curing period
  • C. Kept equal to the aggregate-cement ratio
  • D. Raised until bleeding completely stops

Explanation

For a properly compacted mix, a lower water-cement ratio usually produces higher compressive strength because it leaves fewer capillary voids after hydration. Excessive reduction, however, can reduce workability and cause incomplete compaction.

Written and checked by , MS Computer ScienceLast updated
Report an error

The more specific you are, the faster it gets fixed. A source beats an opinion.

Prefer email? support@testustad.com

About Concrete Technology

Concrete technology covers cement, aggregates, water and admixtures, including their properties, proportioning and effect on fresh and hardened concrete. It explains workability, water-cement ratio, setting, hydration, strength, durability, curing, mix design and common defects, while distinguishing segregation and bleeding from general loss of workability.

Practise Concrete Technology

80 free Concrete Technology MCQs from Civil Engineering, each with the correct answer and an explanation. Unlimited attempts, no account needed.

Discussion

Stuck on an option, or know a faster way to get there? Ask or explain it here.

No comments yet. Be the first to explain this one.

Exams that ask Civil Engineering questions like this

Civil Engineering is on 3 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.

More Concrete Technology questions