TestUstad
Moderate

A galvanometer can be flitrarted into a voltmeter by connecting:

Correct answer: A. High resistance in series

  • A. High resistance in series
  • B. Low resistance in parallel
  • C. High resistance in parallel
  • D. None of these

Explanation

To convert a galvanometer into a voltmeter, a high resistance, known as a multiplier resistor, is connected in series with the galvanometer. The purpose of the multiplier resistor is to limit the current flowing through the galvanometer when it is connected across a voltage source. By increasing the total resistance in the circuit, the multiplier resistor allows the galvanometer to measure the voltage drop across it accurately. The scale of the galvanometer can be calibrated to indicate the voltage directly.

Last updated

About Electromagnetism

Magnetic flux density and magnetic flux describe the strength of a magnetic field and the field passing through a surface. A charged particle moving through a magnetic field experiences a force perpendicular to its velocity and may follow circular or helical motion, depending on the angle between velocity and field.

Practise Electromagnetism

1,176 free Electromagnetism MCQs from Physics, each with the correct answer and an explanation. Unlimited attempts, no account needed.

Start a free Electromagnetism testAll Electromagnetism MCQs

Exams that ask Physics questions like this

Physics is on 13 papers prepared for on TestUstad, and all of them draw the same bank, so this question is worth knowing for every one of them.

NET Physics60 MCQsNUMS Physics40 MCQsAKU Physics36 MCQsDUHS Physics36 MCQsETEA MDCAT Physics36 MCQsKMU Physics36 MCQsMDCAT Physics36 MCQsECAT Physics30 MCQsETEA Engineering Admission Test Physics30 MCQsGIKI Physics30 MCQsNED Physics30 MCQsPIEAS Physics30 MCQsPMD Physics25 MCQs

Related questions

1 Tesla is equal to:

1 tesla is equal to:

2.5π µF capacitor and 3000-ohm resistance are joined in series to an AC source of 200 volts and frequency. The power factor of the circuit and the power dissipated in it will respectively be:

A 10 cm long solenoid has 100 turns. What will be the magnetic field inside it along its axis if one-microampere current is passed through it?

A 100-turn coil of area 0.1 m2 rotates at half a revolution per second. It is placed in a uniform magnetic field of 0.01 T perpendicular to the axis of rotation of the coil. Calculate the maximum voltage generated in the coil?